日韩亚洲av无码一区二区三区_影音先锋男人站_军人全身脱精光自慰_亚洲精品www久久久_在线视频夫妻内射

TriStar MPPT 600V Solar controller

TriStar MPPT 600V Solar controller

Model and rating

TriStar MPPT 600V has two models

TS-MPPT-60-600V-48

Maximum 60 ampere charging current for battery.

DC system voltage 48V

PV input DC voltage maximum 600V

Communication includes RS-232, EIA-485, MeterBusTM, and Ethernet.

TS-MPPT-60-600V-48-DB

Maximum 60 ampere charging current for battery.

DC system voltage 48V

PV input DC voltage maximum 600V

Main characteristics

The name and characteristics of each part of the TriStar MPPT 600V-48 model controller are shown in Figure 2-1 below.

 
b8003d9ee636321f3f49df201de32842.jpg
 
1 – heat radiators from the aluminum radiator help the controller to discharge the heat from the work (in view of reliability, TriStar MPPT 600V is designed to be 100% passive heat dissipation).
 
2 – LED indicator 3 power charge LED indicator shows charge status and controller failure.
 
3 - dial setting switch and 8 dial setting switch for different configuration of TriStar MPPT 600V.
 
4 – positive pole connection (red) battery positive pole connector.
 
5 - MeterBusTM interface RJ-11 MorningStar for general purpose MeterBusTM networking
 
6 -- RJ-45 block for Ethernet interface LAN and Ethernet interface.
 
7 - RS-232 serial interface 9 pin series interface (concave)
 
8 - EIA-485 interface for EIA-485 communication 4 bit connector
 
9 - earth terminal (2) grounding of the controller housing.
 
10 – blank instrument cover (fixed with 4 screws) optional digital display screen (model: TS-M-2-600V) mounting cover.
 
11 - battery negative connection terminal battery negative connection connector.
 
12 - remote temperature sensor connector and morning star (MorningStar) remote temperature sensor (RTS) to monitor battery temperature connections.
 
13 - the cover of the junction box to protect the power connector.
 
14 – photovoltaic terminal bridge (yellow) is used to isolate PV terminal high voltage and low voltage connection areas.
 
15 - photovoltaic junction terminal PV positive and negative pole power connector
 
16 – battery voltage induction connector to accurately measure battery voltage connections.
 
17 - button switch manually reset faults or errors, also used for manual on / off balance.
 
 
 
The name and characteristics of each part of the TriStar MPPT 600V-48-DB model controller are shown in Figure 2-2 below.
 
748a48e1e161e509c4b3c7781773f67a.jpg
 
1 – heat radiators from the aluminum radiator help the controller to discharge the heat from the work (in view of reliability, TriStar MPPT 600V is designed to be 100% passive heat dissipation).
 
2 - battery negative pole power connector, battery cable negative terminal power connector.
 
3 - battery positive power supply connector (red) power connector of battery cable positive terminal
 
4 - dial setting switch and 8 dial setting switch for different configuration of TriStar MPPT 600V-DB.
 
5 - MeterBusTM interface RJ-11 MorningStar for general purpose MeterBusTM networking
 
6 -- RJ-45 block for Ethernet interface LAN and Ethernet interface.
 
7 - RS-232 serial interface 9 pin series interface (concave)
 
8 - EIA-485 interface for EIA-485 communication 4 bit connector
 
9 – battery connections are used to connect the positive and negative poles of the battery.
 
10 - earth wire joint system earthing connection head
 
11 - Photovoltaic terminal wiring board (showing 1) for power supply of PV positive and negative electrodes
 
12 - auxiliary DIN Guide
 
13 - isolation point of battery positive pole of battery circuit breaker
 
14 - earth wire joint system earthing connection head
 
15 - isolating switch for PV terminal isolator
 
16 – photovoltaic terminal bridge (yellow) is used to isolate PV terminal high voltage and low voltage connection areas.
 
17 - Photovoltaic negative electrode power connector has been connected to the PV negative extreme cable connection point.
 
18 - Photovoltaic positive electrode power supply connector has been connected to the PV extreme cable connection point.
 
19 – battery voltage induction connector to accurately measure battery voltage connections.
 
20 - button switch manually reset faults or errors, also used for manual on / off balance.
 
21 - remote temperature sensor connector and morning star (MorningStar) remote temperature sensor (RTS) to monitor battery temperature connections.
 
22 – LED indicator 3 power charge LED indicator shows charge status and controller failure.
 
fb23c7bc2c774f7342588919f783033a (1).jpg
0df9b0e705ff3731fef32ba62f0ff6d0.jpg
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
亚洲精品一区国产精品丝瓜| 久久狠狠色噜噜狠狠狠狠97| 国产一区二区三区av在线无码观看| 亚洲一区二区观看播放| 洗澡被公强奷30分钟视频| 久久久国产一区二区三区| 熟女性饥渴一区二区三区| 亚洲av无码精品色午夜| 亚洲国产精品成人天堂| 男人的天堂免费a级毛片无码| 真人做人试看60分钟免费| 欧美 日韩 国产 成人 在线观看| 中文字幕人妻互换av久久| 欧美伊人色综合久久天天| 亚洲夜色噜噜av在线观看| 国产精品igao视频网网址| 十八禁在线观看视频播放免费| 97精品人妻一区二区三区香蕉| 国产精品无码久久综合网| 国产精品亚洲欧美大片在线看| 久久人人妻人人做人人爽| 成人精品视频一区二区三区| 18禁黄网站禁片免费观看女女| 14萝自慰专用网站| 性欧美丰满熟妇xxxx性久久久| 男男车车的车车网站w98免费| 亚洲熟妇少妇任你躁在线观看无码| 日韩人妻无码一区二区三区久久99| 精品欧洲av无码一区二区14| 波多野结衣乳巨码无在线观看| 中文字幕人妻丝袜成熟乱| 麻豆国产原创视频在线播放| 亚洲日韩av无码美腿丝袜| 无码人妻久久一区二区三区蜜桃| 真实的国产乱xxxx在线| 精品视频国产狼友视频| 娜娜麻豆国产电影| 亚洲午夜未满十八勿入网站2| 亚洲国产精品18久久久久久| 2020国产成人精品视频| 国产精品a无线|